Sort by:
5 products
5 products
“Slamma Jamma” Umbrella Holder, the best Slam Pole on the market. Set up your PIPELINERS CLOUD® anywhere by slamming this holder into the ground (none of that washer or chain BS getting caught everywhere).
- 20"-26" of Slamma Action. Most in class to drive it through the hard-packed ground
- Internal built hammering action that hammers the holder in and out of the ground
- Bolt-on bottom to adjust the height if necessary
- Built strong with Heavy Duty nuts as stoppers
- Fully welded NOT just tacked
- Powder Coated
- Compatible with 10’ and 8’ PIPELINERS CLOUD® Umbrellas
- Height: 5' 6" tall
- Weight: 17lbs
Use the Slamma Jamma welding umbrella holder to stick your PIPELINERS CLOUD® umbrella into the ground while you’re on the go. The Slamma Jamma works great on all kinds of surfaces, including dirt, clay, and sand. The Slamma Jamma umbrella holder is also very durable and easy to use. Whether you’re using it in your backyard or at a work site, the Slamma Jamma umbrella holder is a great choice.
Important Safety Notice:
Before installing or slamma Jamma poles into the ground, please ensure the area is clear of underground utilities such as water or electrical lines. To avoid any potential damage or safety hazards, always call 811 before you dig. This free service will help identify any buried utility lines on your property.
Due to high demand, not guaranteed to ship same day
“Slamma Jamma” Umbrella Holder, the best Slam Pole on the market. Set up your PIPELINERS CLOUD® anywhere by slamming this holder into the ground (none of that washer or chain BS getting caught everywhere).
- 20"-26" of Slamma Action. Most in class to drive it through the hard-packed ground
- Internal built hammering action that hammers the holder in and out of the ground
- Bolt-on bottom to adjust the height if necessary
- Built strong with Heavy Duty nuts as stoppers
- Fully welded NOT just tacked
- Powder Coated
- Compatible with 10’ and 8’ PIPELINERS CLOUD® Umbrellas
- Height: 5' 6" tall
- Weight: 17lbs
Use the Slamma Jamma welding umbrella holder to stick your PIPELINERS CLOUD® umbrella into the ground while you’re on the go. The Slamma Jamma works great on all kinds of surfaces, including dirt, clay, and sand. The Slamma Jamma umbrella holder is also very durable and easy to use. Whether you’re using it in your backyard or at a work site, the Slamma Jamma umbrella holder is a great choice.
Important Safety Notice:
Before installing or slamma Jamma poles into the ground, please ensure the area is clear of underground utilities such as water or electrical lines. To avoid any potential damage or safety hazards, always call 811 before you dig. This free service will help identify any buried utility lines on your property.
Due to high demand, not guaranteed to ship same day
Heavy-Duty Stand for PIPELINERS CLOUD® or Poles Up to 1.5" Diameter
- Stainless Steel Bolts: Durable and rust-resistant for long-lasting performance.
- Heavy-Duty Build: Weighs 18 lbs for increased stability and durability. It weighs 80% more than the industry standard.
- Wider Leg Stance: Offers extra stability with legs extending approximately 47 5/8" apart when fully opened.
- Height: Stands at 29 1/8" tall for optimal functionality.
- Anchor Points: Pre-drilled holes on the feet allow for secure anchoring.
- Secure Locking System: Features two heavy-duty eye bolts to firmly lock the PIPELINERS CLOUD® in place.
- Transport-Friendly: Includes a strap and buckle to keep legs closed for easy transport.
Ideal for hard paved surfaces where the Slamma Jamma cannot be used.
Block the sun and the wind at the same time with the Sun & Wind Blocker Attachment: 1-2 Punch. Designed by welders who understand the difference a good shade setup can make on a job site, this double-ringed umbrella connector lets you use two PIPELINERS CLOUD umbrellas in tandem — one blocking out the intense sunlight overhead while the other blocks out heavy gusts of wind from the side. If you’re looking for a practical way to protect your welding zone while expanding your shade coverage, the 1-2 Punch has you covered.
This umbrella attachment is compatible with both our 8-foot and 10-foot welding umbrellas, as well as any umbrella with an outside diameter (OD) of up to 1.5 inches. To use this umbrella connector, you will need either the 'Slamma Jamma' Umbrella Stand or the Tailgater Hitch Umbrella Holder, which gives you the flexibility to set up your station around the job site or your vehicle.
Choose the 1-2 Punch option that works best for you:
- 1-2 Punch Fully Welded: Get your umbrella connector fully welded, powder-coated, and ready to go! Spend less time building your gear and more time on the job. No assembly required.
- Weld it Yourself Kit: For those who like to do it themselves, this kit comes with all the parts you need to make your own 1-2 Punch.
Like our umbrellas, the 1-2 Punch can be used for work and play. Create a shaded oasis in your backyard, or use it to take your tailgating to the next level. Whatever your needs, just know that we’ve got you covered on both sides.
Please note: The Sun & Wind Blocker Attachment: 1-2 Punch comes with the attachment only. Welding umbrellas and the compatible mounting system must be purchased separately.
Block the sun and the wind at the same time with the Sun & Wind Blocker Attachment: 1-2 Punch. Designed by welders who understand the difference a good shade setup can make on a job site, this double-ringed umbrella connector lets you use two PIPELINERS CLOUD umbrellas in tandem — one blocking out the intense sunlight overhead while the other blocks out heavy gusts of wind from the side. If you’re looking for a practical way to protect your welding zone while expanding your shade coverage, the 1-2 Punch has you covered.
This umbrella attachment is compatible with both our 8-foot and 10-foot welding umbrellas, as well as any umbrella with an outside diameter (OD) of up to 1.5 inches. To use this umbrella connector, you will need either the 'Slamma Jamma' Umbrella Stand or the Tailgater Hitch Umbrella Holder, which gives you the flexibility to set up your station around the job site or your vehicle.
Choose the 1-2 Punch option that works best for you:
- 1-2 Punch Fully Welded: Get your umbrella connector fully welded, powder-coated, and ready to go! Spend less time building your gear and more time on the job. No assembly required.
- Weld it Yourself Kit: For those who like to do it themselves, this kit comes with all the parts you need to make your own 1-2 Punch.
Like our umbrellas, the 1-2 Punch can be used for work and play. Create a shaded oasis in your backyard, or use it to take your tailgating to the next level. Whatever your needs, just know that we’ve got you covered on both sides.
Please note: The Sun & Wind Blocker Attachment: 1-2 Punch comes with the attachment only. Welding umbrellas and the compatible mounting system must be purchased separately.
All of our PIPELINERS CLOUD® umbrellas come with a portable storage tube that allows you to take your shade with you, wherever you go. In the case that you lose your storage cap for the tube, you can order a new one right here! This cap will fit securely on your previously purchased storage tube. Keep in mind that the replacement cap and storage tube are designed to hold PIPELINERS CLOUD® umbrellas only. Order your storage tube replacement lid online at PIPELINERS CLOUD® today.
Recently Viewed
FAQs
Welding Umbrella Accessories Built for the Job
The Pipeliners Cloud umbrella is built to handle the demands of your job site, and your welding umbrella accessories should be, too. When conditions get tough, you need gear that can keep up. Our umbrella accessories are built for the welders who don’t have the luxury of waiting for the perfect weather. From heavy-duty umbrella stands and holders to innovative umbrella attachments and storage solutions, this collection of outdoor umbrella accessories gives you the tools to get even more out of your Cloud.
An Umbrella Attachment That Does More
Small Enough to listen; Big Enough to deliver. You asked for a way to block out the sun and the wind at the same time, and we got to work to bring you the 1-2 Punch Sun and Wind Blocker. Our innovative umbrella attachments are designed to expand the range of your welding umbrellas. With the 1-2 Punch, you can securely connect two umbrellas for double the protection, giving you the coverage you need to stay focused on your weld. The 1-2 Punch is to be used with our Slamma Jamma umbrella pole.
Take Your Umbrella Anywhere
Not all outdoor umbrella accessories are built for industrial use. Ours are. Every umbrella stand, attachment, and storage tube is designed to withstand the unpredictable conditions that come with pipeline work, construction sites, and other outdoor projects, but their usefulness goes beyond the job site. Whether you’re tailgating, camping, or setting up at the beach, these heavy-duty umbrella accessories have got you covered.
Explore our collection of welding umbrella accessories and find everything you need to keep your Pipeliners Cloud umbrella ready for work and wherever life takes you.
