Sort by:
129 products
129 products
Welders use different types of welding lenses to match the lens shade with the specific welding process. However, a clear, clean welding lens is essential for all welders. These clear lens covers will serve as a protective shield for the main filter lens in a welding helmet. The clear cover lens can greatly extend the lens life of your lenses, so make sure to keep one on at all times.
- Size: 2" x 4 1/4"
- ANSI Z87.1 and CSA Z94.3
- Available in packs of 10, 25, 50, or 100
- Same Day Shipping if you order before 2 pm CST M-F
Our EAGLE VISION™ clear Cover lenses are compatible with all of our Famous carbon fiber welding hoods, so be sure to pick one up!
Block the sun and the wind at the same time with the Sun & Wind Blocker Attachment: 1-2 Punch. Designed by welders who understand the difference a good shade setup can make on a job site, this double-ringed umbrella connector lets you use two PIPELINERS CLOUD umbrellas in tandem — one blocking out the intense sunlight overhead while the other blocks out heavy gusts of wind from the side. If you’re looking for a practical way to protect your welding zone while expanding your shade coverage, the 1-2 Punch has you covered.
This umbrella attachment is compatible with both our 8-foot and 10-foot welding umbrellas, as well as any umbrella with an outside diameter (OD) of up to 1.5 inches. To use this umbrella connector, you will need either the 'Slamma Jamma' Umbrella Stand or the Tailgater Hitch Umbrella Holder, which gives you the flexibility to set up your station around the job site or your vehicle.
Choose the 1-2 Punch option that works best for you:
- 1-2 Punch Fully Welded: Get your umbrella connector fully welded, powder-coated, and ready to go! Spend less time building your gear and more time on the job. No assembly required.
- Weld it Yourself Kit: For those who like to do it themselves, this kit comes with all the parts you need to make your own 1-2 Punch.
Like our umbrellas, the 1-2 Punch can be used for work and play. Create a shaded oasis in your backyard, or use it to take your tailgating to the next level. Whatever your needs, just know that we’ve got you covered on both sides.
Please note: The Sun & Wind Blocker Attachment: 1-2 Punch comes with the attachment only. Welding umbrellas and the compatible mounting system must be purchased separately.
Block the sun and the wind at the same time with the Sun & Wind Blocker Attachment: 1-2 Punch. Designed by welders who understand the difference a good shade setup can make on a job site, this double-ringed umbrella connector lets you use two PIPELINERS CLOUD umbrellas in tandem — one blocking out the intense sunlight overhead while the other blocks out heavy gusts of wind from the side. If you’re looking for a practical way to protect your welding zone while expanding your shade coverage, the 1-2 Punch has you covered.
This umbrella attachment is compatible with both our 8-foot and 10-foot welding umbrellas, as well as any umbrella with an outside diameter (OD) of up to 1.5 inches. To use this umbrella connector, you will need either the 'Slamma Jamma' Umbrella Stand or the Tailgater Hitch Umbrella Holder, which gives you the flexibility to set up your station around the job site or your vehicle.
Choose the 1-2 Punch option that works best for you:
- 1-2 Punch Fully Welded: Get your umbrella connector fully welded, powder-coated, and ready to go! Spend less time building your gear and more time on the job. No assembly required.
- Weld it Yourself Kit: For those who like to do it themselves, this kit comes with all the parts you need to make your own 1-2 Punch.
Like our umbrellas, the 1-2 Punch can be used for work and play. Create a shaded oasis in your backyard, or use it to take your tailgating to the next level. Whatever your needs, just know that we’ve got you covered on both sides.
Please note: The Sun & Wind Blocker Attachment: 1-2 Punch comes with the attachment only. Welding umbrellas and the compatible mounting system must be purchased separately.
Hitch your PIPELINERS CLOUD® umbrella to the back of your truck or buggy for all your shade and tailgating needs with our Tailgater Hitch Umbrella Holder. In a matter of minutes, you’ll be able to install this tailgate umbrella holder to the back of your truck. Our umbrella hitch mount is compatible with all of the umbrellas available at Pipeliners Cloud as well as 95% of all outdoor umbrellas with poles up to 1.5” outside diameter (OD).
Created for an easy setup and everyday versatility, the Tailgater Hitch Umbrella Holder is the go-to for convenience. This truck umbrella holder fits the universal standard 2-inch hitch receiver. The 30” length is designed to clear the tailgate, so you don’t need to purchase an additional extension for most vehicles, and the 12” umbrella sleeve securely holds your umbrella even in the windiest conditions.
Pair this umbrella hitch mount with one of our heavy-duty 10-foot or 8-foot umbrellas to create your own complete mobile shade system. Whether you’re working outside, spending the day at the beach, or setting up for a tailgate, our Tailgater Hitch Umbrella Holder gives you a simple way to bring dependable shade with you wherever you go.
*Umbrella Not Included
Want comfort while working? Try out these Front Leather Headbands for your headgear, made by a fellow welder.
PRODUCT DESCRIPTION
Want comfort while working? Try out these Front Leather Headbands for your headgear. You can easily affix these welding hood headbands to the inside of your headgear, right where your forehead would be positioned. You can easily attach welder made headbands to just about any welding hood on the market, including the carbon fiber hoods and Finer Sugar Scoop hoods available at PIPELINERS CLOUD®.
When you order your welder made headbands, expect a tan leather exterior, silver snaps, and a couple of replacement parts. This headband will fit Fibre Metal, Miller, Hobart, and Jackson products.
These premium welding hood headbands are made by your fellow welder, David Estrada. PIPELINERS CLOUD® offers three shades of leather welding hood headbands.
Want comfort while working? Try out these Front Leather Headbands for your headgear, made by a fellow welder.
PRODUCT DESCRIPTION
Want comfort while working? Try out these Front Leather Headbands for your headgear. You can easily affix these welding hood headbands to the inside of your headgear, right where your forehead would be positioned. You can easily attach welder made headbands to just about any welding hood on the market, including the carbon fiber hoods and Finer Sugar Scoop hoods available at PIPELINERS CLOUD®.
When you order your welder made headbands, expect a tan leather exterior, silver snaps, and a couple of replacement parts. This headband will fit Fibre Metal, Miller, Hobart, and Jackson products.
These premium welding hood headbands are made by your fellow welder, David Estrada. PIPELINERS CLOUD® offers three shades of leather welding hood headbands.
Want comfort while working? Try out these Front Leather Headbands for your headgear, made by a fellow welder.
PRODUCT DESCRIPTION
Want comfort while working? Try out these Front Leather Headbands for your headgear. You can easily affix these welding hood headbands to the inside of your headgear, right where your forehead would be positioned. You can easily attach welder made headbands to just about any welding hood on the market, including the carbon fiber hoods and Finer Sugar Scoop hoods available at PIPELINERS CLOUD®.
When you order your welder made headbands, expect a tan leather exterior, silver snaps, and a couple of replacement parts. This headband will fit Fibre Metal, Miller, Hobart, and Jackson products.
These premium welding hood headbands are made by your fellow welder, David Estrada. PIPELINERS CLOUD® offers three shades of leather welding hood headbands.
Like your Pipeliner Welding Hood but wish it had a flip-front? We got you! Introducing our new clip-on flip-front adaptor.
PRODUCT DESCRIPTION
Transform your welding hood with a Pipeliner flip-front adapter. This flip lens for welding hoods allows you to transform a normal non-flip Pipeliner style hood into a flip-up in a matter of minutes. Updating your Pipeliner welding helmet with a flip-front is great for welders that already have a high quality hood. The Pipeliner flip-front adapter is easily removable and extremely light, so you’ll hardly notice the difference when you put it on! The Weld Tube Clip-On Flip-Front Adaptor features:
- No need to cut the Pipeliner hood, adaptor clips on in a few seconds.
- Adaptor is easily removable
- Lightest adaptor in the market weighing at 2 oz
- Adaptor may fit other similar hoods that have the same 2” x 4” viewing box
- Includes a Metal Retaining Clip
- Meets ANSI Z87.1
* Flip-front adapter is compatible with our ClearView HD auto-darkening lens (variable shade 8-13), one shade auto-darkening lenses (3/16" thickness), and regular fixed shade welding lenses. ALL with one clear plastic in front and back of lens.
* Flip-front adapter is Not compatible with the THICK (5/16" thickness) variable shade auto-darkening lenses like the Lincoln C series.
Flip-Front Adapter not compatible with our Finer Sugar Scoop Welding hoods.
Order the Pipeliners Hood Headgear to replace the setup on your current welding hood. This welding hood headgear is fully adjustable to fit most head sizes without compromising comfort, giving you a secure and personalized fit without slowing down the work in front of you.
Designed for comfort as much as performance, this replacement welding helmet headgear is compact and lightweight, with forehead padding to help reduce pressure points and soak up sweat while you’re hard at work. The overhead band helps support your helmet and distribute the weight across the top of your head to reduce neck strain throughout the workday. It also features multiple adjustment points so you can position the lens holder to your liking for an optimal view of your welds. The ratchet system in the back lets you adjust your hood’s tightness to your liking, keeping it locked in place. The design makes it easy to make quick adjustments even while wearing gloves.
The Pipeliners Hood Headgear fits 90% of hoods on the market and can be used as a replacement for the Honeywell Fibre-Metal 1CR. It's also compatible with all of our aluminum welding hood fasteners, making it easy to add a personal touch to your setup.
For dependable welding headgear that delivers comfort and stability while welding, order your Pipeliners Hood Headgear today.
Note: This welding headgear is compatible with all of our welding hoods EXCEPT for the JOLLY™ and Pancake UNO™. If you need a replacement for the JOLLY, check out the Pipeliners Cloud Headgear 2.0.
Metal Retaining Clip and Spring for 2" x 4 1/4" Lens Box. This retaining spring clip is easy to install on appropriately sized welding hoods, but will stay secure while you work. These metal welding hood parts are also durable, and built to last, allowing you to focus on your welds and not your gear.
Replacement for Fibre-Metal by Honeywell 9101-H5 Retaining Spring for 2" x 4.25"
- Product Dimensions - 1 x 1 x 6 inches
- Material - Metal
- Color- Black
Be sure to watch our video, which demonstrates how easy it is to install these welding helmet parts. Simply layer in the welding lens and clear lenses into your welding hood, add the spring, then attach the metal retaining clip on top. In minutes you’ll be able to swap lenses and get right back to your welds!
The best premium welding caps on the market! Not fancy, just great fitting.
Quality stitching, none of the fancy stitching with single stitch on the inside. Tear one open and see for yourself!
Softest, lightest material that clings to your head so it stays put as it should! 100% Pre-Shrunk Cotton, the closest thing to the Original Cary's with a True Deep Fit that sits mid-ear.
PIPELINERS CLOUD® Gift Cards are the perfect welding gift for welders of all types. Our extensive catalog of products features dozens of items applicable to everyday welders like you. Shop for PIPELINERS CLOUD® apparel, Cary welding caps, or even a brand new welding hood, customized to your liking. Gift cards are sometimes the best gifts for welders, because they provide the recipient with the flexibility to choose exactly what they want, eliminating the risk of giving something they won't like or can't use.
Our welding gift cards come in over a dozen different price denominations from $10 to $1,000.
*** Important: please note that these fasteners are only compatible with our 1.0 Pipeliners Hood Headgear or Fibermetal CR1 Headgear.
These fasteners are NOT compatible with our 2.0 PIPELINERS CLOUD® Headgear.
Protect your collarbone with Welding Hood Fasteners from PIPELINERS CLOUD®. Say goodbye to those stripped-out plastic ones! Designed for welders who value both style and functionality, these fasteners keep your hood snug and secure without the hassle.
The 12-sided welding fasteners are engineered for efficiency without compromising precision. Simply lock in your fasteners and proceed with your welding tasks seamlessly.
PIPELINERS CLOUD® metal welding hood fasteners come with:
- Lifetime Guarantee- Not to strip out
- Unique polished finish.
