Sort by:
23 products
23 products
Order the Pipeliners Hood Headgear to replace the setup on your current welding hood. This welding hood headgear is fully adjustable to fit most head sizes without compromising comfort, giving you a secure and personalized fit without slowing down the work in front of you.
Designed for comfort as much as performance, this replacement welding helmet headgear is compact and lightweight, with forehead padding to help reduce pressure points and soak up sweat while you’re hard at work. The overhead band helps support your helmet and distribute the weight across the top of your head to reduce neck strain throughout the workday. It also features multiple adjustment points so you can position the lens holder to your liking for an optimal view of your welds. The ratchet system in the back lets you adjust your hood’s tightness to your liking, keeping it locked in place. The design makes it easy to make quick adjustments even while wearing gloves.
The Pipeliners Hood Headgear fits 90% of hoods on the market and can be used as a replacement for the Honeywell Fibre-Metal 1CR. It's also compatible with all of our aluminum welding hood fasteners, making it easy to add a personal touch to your setup.
For dependable welding headgear that delivers comfort and stability while welding, order your Pipeliners Hood Headgear today.
Note: This welding headgear is compatible with all of our welding hoods EXCEPT for the JOLLY™ and Pancake UNO™. If you need a replacement for the JOLLY, check out the Pipeliners Cloud Headgear 2.0.
Block the sun and the wind at the same time with the Sun & Wind Blocker Attachment: 1-2 Punch. Designed by welders who understand the difference a good shade setup can make on a job site, this double-ringed umbrella connector lets you use two PIPELINERS CLOUD umbrellas in tandem — one blocking out the intense sunlight overhead while the other blocks out heavy gusts of wind from the side. If you’re looking for a practical way to protect your welding zone while expanding your shade coverage, the 1-2 Punch has you covered.
This umbrella attachment is compatible with both our 8-foot and 10-foot welding umbrellas, as well as any umbrella with an outside diameter (OD) of up to 1.5 inches. To use this umbrella connector, you will need either the 'Slamma Jamma' Umbrella Stand or the Tailgater Hitch Umbrella Holder, which gives you the flexibility to set up your station around the job site or your vehicle.
Choose the 1-2 Punch option that works best for you:
- 1-2 Punch Fully Welded: Get your umbrella connector fully welded, powder-coated, and ready to go! Spend less time building your gear and more time on the job. No assembly required.
- Weld it Yourself Kit: For those who like to do it themselves, this kit comes with all the parts you need to make your own 1-2 Punch.
Like our umbrellas, the 1-2 Punch can be used for work and play. Create a shaded oasis in your backyard, or use it to take your tailgating to the next level. Whatever your needs, just know that we’ve got you covered on both sides.
Please note: The Sun & Wind Blocker Attachment: 1-2 Punch comes with the attachment only. Welding umbrellas and the compatible mounting system must be purchased separately.
Block the sun and the wind at the same time with the Sun & Wind Blocker Attachment: 1-2 Punch. Designed by welders who understand the difference a good shade setup can make on a job site, this double-ringed umbrella connector lets you use two PIPELINERS CLOUD umbrellas in tandem — one blocking out the intense sunlight overhead while the other blocks out heavy gusts of wind from the side. If you’re looking for a practical way to protect your welding zone while expanding your shade coverage, the 1-2 Punch has you covered.
This umbrella attachment is compatible with both our 8-foot and 10-foot welding umbrellas, as well as any umbrella with an outside diameter (OD) of up to 1.5 inches. To use this umbrella connector, you will need either the 'Slamma Jamma' Umbrella Stand or the Tailgater Hitch Umbrella Holder, which gives you the flexibility to set up your station around the job site or your vehicle.
Choose the 1-2 Punch option that works best for you:
- 1-2 Punch Fully Welded: Get your umbrella connector fully welded, powder-coated, and ready to go! Spend less time building your gear and more time on the job. No assembly required.
- Weld it Yourself Kit: For those who like to do it themselves, this kit comes with all the parts you need to make your own 1-2 Punch.
Like our umbrellas, the 1-2 Punch can be used for work and play. Create a shaded oasis in your backyard, or use it to take your tailgating to the next level. Whatever your needs, just know that we’ve got you covered on both sides.
Please note: The Sun & Wind Blocker Attachment: 1-2 Punch comes with the attachment only. Welding umbrellas and the compatible mounting system must be purchased separately.
Hitch your PIPELINERS CLOUD® umbrella to the back of your truck or buggy for all your shade and tailgating needs with our Tailgater Hitch Umbrella Holder. In a matter of minutes, you’ll be able to install this tailgate umbrella holder to the back of your truck. Our umbrella hitch mount is compatible with all of the umbrellas available at Pipeliners Cloud as well as 95% of all outdoor umbrellas with poles up to 1.5” outside diameter (OD).
Created for an easy setup and everyday versatility, the Tailgater Hitch Umbrella Holder is the go-to for convenience. This truck umbrella holder fits the universal standard 2-inch hitch receiver. The 30” length is designed to clear the tailgate, so you don’t need to purchase an additional extension for most vehicles, and the 12” umbrella sleeve securely holds your umbrella even in the windiest conditions.
Pair this umbrella hitch mount with one of our heavy-duty 10-foot or 8-foot umbrellas to create your own complete mobile shade system. Whether you’re working outside, spending the day at the beach, or setting up for a tailgate, our Tailgater Hitch Umbrella Holder gives you a simple way to bring dependable shade with you wherever you go.
*Umbrella Not Included
“Slamma Jamma” Umbrella Holder, the best Slam Pole on the market. Set up your PIPELINERS CLOUD® anywhere by slamming this holder into the ground (none of that washer or chain BS getting caught everywhere).
- 20"-26" of Slamma Action. Most in class to drive it through the hard-packed ground
- Internal built hammering action that hammers the holder in and out of the ground
- Bolt-on bottom to adjust the height if necessary
- Built strong with Heavy Duty nuts as stoppers
- Fully welded NOT just tacked
- Powder Coated
- Compatible with 10’ and 8’ PIPELINERS CLOUD® Umbrellas
- Height: 5' 6" tall
- Weight: 17lbs
Use the Slamma Jamma welding umbrella holder to stick your PIPELINERS CLOUD® umbrella into the ground while you’re on the go. The Slamma Jamma works great on all kinds of surfaces, including dirt, clay, and sand. The Slamma Jamma umbrella holder is also very durable and easy to use. Whether you’re using it in your backyard or at a work site, the Slamma Jamma umbrella holder is a great choice.
Important Safety Notice:
Before installing or slamma Jamma poles into the ground, please ensure the area is clear of underground utilities such as water or electrical lines. To avoid any potential damage or safety hazards, always call 811 before you dig. This free service will help identify any buried utility lines on your property.
Due to high demand, not guaranteed to ship same day
“Slamma Jamma” Umbrella Holder, the best Slam Pole on the market. Set up your PIPELINERS CLOUD® anywhere by slamming this holder into the ground (none of that washer or chain BS getting caught everywhere).
- 20"-26" of Slamma Action. Most in class to drive it through the hard-packed ground
- Internal built hammering action that hammers the holder in and out of the ground
- Bolt-on bottom to adjust the height if necessary
- Built strong with Heavy Duty nuts as stoppers
- Fully welded NOT just tacked
- Powder Coated
- Compatible with 10’ and 8’ PIPELINERS CLOUD® Umbrellas
- Height: 5' 6" tall
- Weight: 17lbs
Use the Slamma Jamma welding umbrella holder to stick your PIPELINERS CLOUD® umbrella into the ground while you’re on the go. The Slamma Jamma works great on all kinds of surfaces, including dirt, clay, and sand. The Slamma Jamma umbrella holder is also very durable and easy to use. Whether you’re using it in your backyard or at a work site, the Slamma Jamma umbrella holder is a great choice.
Important Safety Notice:
Before installing or slamma Jamma poles into the ground, please ensure the area is clear of underground utilities such as water or electrical lines. To avoid any potential damage or safety hazards, always call 811 before you dig. This free service will help identify any buried utility lines on your property.
Due to high demand, not guaranteed to ship same day
Replace the top leather of your chopped top PIPELINERS CLOUD® welding hood without needing to buy a new hood.
PRODUCT DESCRIPTION
Shop for replacement leather to repair your damaged welding hoods. After several years of use, a chopped welding hood’s leather may start to wear and tear. Luckily, you can replace the top leather of a welding hood instead of buying a brand new hood. This pipeliner welding hood leather is compatible with all of our carbon fiber welding hoods and finer sugar scoop welding hoods. Simply remove the old piece of leather and replace it with a new one! You can use this replacement leather on the top section of a chopped top welding hood or a chopped top and bottom welding hood.
Choose with or without rivets.
Replace the top leather of your chopped top PIPELINERS CLOUD® welding hood without needing to buy a new hood.
PRODUCT DESCRIPTION
Shop for replacement leather to repair your damaged welding hoods. After several years of use, a chopped welding hood’s leather may start to wear and tear. Luckily, you can replace the top leather of a welding hood instead of buying a brand new hood. This pipeliner welding hood leather is compatible with all of our carbon fiber welding hoods and finer sugar scoop welding hoods. Simply remove the old piece of leather and replace it with a new one! You can use this replacement leather on the top section of a chopped top welding hood or a chopped top and bottom welding hood.
Choose with or without rivets.
Variable Lens Shade 5–13
“From the Shoulder to the Holder”
-
Large View Window – bigger than any 2x4 lens.
-
Grind Mode
-
Good for All Types of Welding – engineered for TIG, won’t flash.
-
Next-Level Innovation – variable lens technology that adjusts from Shade 5 to 13.
-
No Batteries to Replace. No External Charging Required. This lens features self-charging technology that works with shop lights, welding, and sunlight — the only variable lens with this software.
Want comfort while working? Try out these Front Leather Headbands for your headgear, made by a fellow welder.
PRODUCT DESCRIPTION
Want comfort while working? Try out these Front Leather Headbands for your headgear. You can easily affix these welding hood headbands to the inside of your headgear, right where your forehead would be positioned. You can easily attach welder made headbands to just about any welding hood on the market, including the carbon fiber hoods and Finer Sugar Scoop hoods available at PIPELINERS CLOUD®.
When you order your welder made headbands, expect a tan leather exterior, silver snaps, and a couple of replacement parts. This headband will fit Fibre Metal, Miller, Hobart, and Jackson products.
These premium welding hood headbands are made by your fellow welder, David Estrada. PIPELINERS CLOUD® offers three shades of leather welding hood headbands.
Want comfort while working? Try out these Front Leather Headbands for your headgear, made by a fellow welder.
PRODUCT DESCRIPTION
Want comfort while working? Try out these Front Leather Headbands for your headgear. You can easily affix these welding hood headbands to the inside of your headgear, right where your forehead would be positioned. You can easily attach welder made headbands to just about any welding hood on the market, including the carbon fiber hoods and Finer Sugar Scoop hoods available at PIPELINERS CLOUD®.
When you order your welder made headbands, expect a tan leather exterior, silver snaps, and a couple of replacement parts. This headband will fit Fibre Metal, Miller, Hobart, and Jackson products.
These premium welding hood headbands are made by your fellow welder, David Estrada. PIPELINERS CLOUD® offers three shades of leather welding hood headbands.
Want comfort while working? Try out these Front Leather Headbands for your headgear, made by a fellow welder.
PRODUCT DESCRIPTION
Want comfort while working? Try out these Front Leather Headbands for your headgear. You can easily affix these welding hood headbands to the inside of your headgear, right where your forehead would be positioned. You can easily attach welder made headbands to just about any welding hood on the market, including the carbon fiber hoods and Finer Sugar Scoop hoods available at PIPELINERS CLOUD®.
When you order your welder made headbands, expect a tan leather exterior, silver snaps, and a couple of replacement parts. This headband will fit Fibre Metal, Miller, Hobart, and Jackson products.
These premium welding hood headbands are made by your fellow welder, David Estrada. PIPELINERS CLOUD® offers three shades of leather welding hood headbands.
“The Most Comfortable Glove in the Industry.”
Made with one of the softest, most durable leathers in the world, these gloves feel different the second you put them on. You’ll see it. You’ll smell it. No stinky, funky cheap leather here. Really fits like a glove. No pun intended.
These are not your typical extra heavy-duty, hard-as-cardboard cowhide gloves that stain your hands when they get sweaty. Most gloves out there get stiff, wear out fast, and leave your hands feeling worse than the job. These don’t. These are soft, durable, and built for long days. The cat’s meow of the welding glove industry.
Each pair is made in small-batch production, with one seamstress sewing each pair for better quality control in a state-of-the-art facility. Kevlar stitching and piping all the way around help protect the threads and keep these gloves working longer.
Two Styles. One Standard.
Welderman and Welderman Hybrid.
*** Important: please note that these fasteners are only compatible with our 1.0 Pipeliners Hood Headgear or Fibermetal CR1 Headgear.
These fasteners are NOT compatible with our 2.0 PIPELINERS CLOUD® Headgear.
Protect your collarbone with Welding Hood Fasteners from PIPELINERS CLOUD®. Say goodbye to those stripped-out plastic ones! Designed for welders who value both style and functionality, these fasteners keep your hood snug and secure without the hassle.
The 12-sided welding fasteners are engineered for efficiency without compromising precision. Simply lock in your fasteners and proceed with your welding tasks seamlessly.
PIPELINERS CLOUD® metal welding hood fasteners come with:
- Lifetime Guarantee- Not to strip out
- Unique polished finish.
*** Important: please note that these fasteners are only compatible with our 1.0 Pipeliners Hood Headgear or Fibermetal CR1 Headgear.
These fasteners are NOT compatible with our 2.0 PIPELINERS CLOUD® Headgear.
Upgrade your welding hood with premium fasteners that are built to last. Our entire collection of welding hood fasteners are made of metal, which is much more durable than the standard plastic fasteners. This variety of round fasteners is a standard design with a grip around the edge for quicker implementation.
Order round metal welding hood fasteners today and replace the cheap plastic ones that strip out at the MOST UNFORTUNATE TIME (when you're on a pipe rack and the cheap plastic one falls out nowhere to be seen).
Lifetime Guarantee- Not to strip out
Unique polished finish.
Recently Viewed
- Choosing a selection results in a full page refresh.
- Opens in a new window.
